PreviousMicroJig Fitfinder 1/2 Gaug...

NextMicroJig GRR Ripper Complet...

MicroJig GRR Ripper Advanced - GR200

Be the first to review this product

Don’t use a table saw without it.

£90.67

Manufacturer: MicroJig

SKU: GR-200

Qty:

+ -

Key Features

The GRR-RIPPER® Advanced 3D Pushblock offers the same level of precision, safety, and control as the original, but with two additional accessories for even more control. It’s the most Advanced pushblock in the world.

Three directions of force.

Three directions of force provide essential stability for superior precision, safety, and control.

Downward pressure stabilizes work piece on a flat surface.
Inward pressure against the fence virtually eliminates kickback.
Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.

Virtually eliminates kickback on table saws.

Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.

The GRR-RIPPER® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.

Rip without stopping and burning.

Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.

Table Saws The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼” x ¼”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

Router Tables The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

Jointers The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure. The GRR-RIPPER makes proper face-jointing technique easy, and safe.

Band Saws The GRR-RIPPER’s legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Key Features

Three directions of force.

Three directions of force provide essential stability for superior precision, safety, and control.

Downward pressure stabilizes work piece on a flat surface.
Inward pressure against the fence virtually eliminates kickback.
Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.